The Tianqu series gas alarm controller can be combined with gas detectors to form an intelligent industrial gas control system, which is used for monitoring and alarming gas concentrations on the industrial site. When the air contains the measured gas or liquid volatilization, the detector generates an electrical signal proportional to the concentration of the measured gas in the air. This signal is transmitted to the controller, which processes and displays the measured gas concentration. When the measured gas concentration reaches or exceeds the set value, the controller emits audible and visual alarm signals and outputs relevant control signals to activate the corresponding control devices, thereby preventing major accidents from occurring









TIANQU Series
Tianqu Series Fixed Gas Detector
Model: YQKT
Sales Hotline
136-8498-6459
Threshold check / alarm setpoint? Quick links to engineer tools:
🧪 Concentration Converter →
⚙️ GB Alarm Calculator →
Product Overview
Application Scenarios
Product Features
7-inch color LCD display, full touch operation;
2-channel RS485 communication interface, 1-channel wireless output Dual CPU system architecture Large-capacity storage, with a storage memory of 32G 6 sets of passive contact relays;Audible and visual alarm function Mounting holes outside the chassis, wall-mounted
Product Specifications
Operating power supply: 220VAC±20% Number of detectors that can be connected (units) 1-32 units Input signal RS485, RolaCommunication modes: RS485, 4G, NB
Alarm mode: Buzzer alarm at 95dB@30cm; LED strobe light alarm (highlighted in red) Relay output: 6 sets of passive normally open/closed contacts Relay output contact capacity: 24VDC@2A or 220VAC@5A Relay output type: level/pulse output optional Operation mode: Full touch screen operation Data recording: With a storage interval of 1 minute, it can store data for over half a year Data Viewing: Information regarding alarm data can be accessed and viewed on the display screen Data export: Support for exporting alarm data via USB flash drive Operating temperature: 20℃-50℃ Operating humidity: 10%RH~95%RH (non-condensing) Operating pressure: 86Kpa~106Kpa Overall dimensions: 474.75mm*280mm*85mm (length * width * height) Weight: Approximately 3.6kg Protection level: IP54
Refer to the standard GB16808-2008


